Adam's new NSD build in progress

A few pictures of my newest Dalek
under construction - part 2
(click photos for bigger)

The continuing story of my build of the new, revamped Daleks from the 2005 series of Dr Who.
bolts fitted in the top of the shoulders	Three bolts that lock into...	...plates in the bottom of the neck section	Painting starts
Skirt primed	Top gets painted black	Dome primed	Everything primed!
Grooves cut in fender	Textured stone paint is sprayed onto the fender	Black goes on next	Small bolts for detail
Gap behind slats filled	Back of slats, each is unique hence the numbering	slats, sealed and primed in white	hemis re-primed in white
Ready for colour	Slats painted	Neck cage painted	Shoulders painted
Hinges fitted between shoulders and skirt	Together but not finished	Components of the eye	Blue LED in the eye
Nice	Ear light holders	Fitted to the dome	Cages bolted over the top
Airbrush for fine detailing	Weathering applied	Shoulders weathered	Neck cage after lacquer applied over the weathering
Shoulders Lacquered	seat fitted	Skirt gets weathering	Close up of some weathering
Skirt lacquered	Sections of rubber mat fitted inside the neck	mesh has voile glued to it	Mesh and voile fitted to blackout the neck
Closeup of neck		Handle to turn the dome and control the eye	Eyestalk linkage
For the end of the gun, four LEDs and a tube for the water.	Switch to 'fire' the gun	Flashes when the gun is fired	Electrical junction box and battery
Wiring at the front	Speakers fittd in the neck	Reflective tape fitted under the fender	Homemade clips to hold the lights in
Inverter to power the lights	Testing the lights	Underskirt light switch	Second battery added for the underskirt lights
Nearly done	Last detail, the ID tag that goes under the eyestalk	ID tag fitted	Back to part one To see the finished Dalek go to the main Dalek Index